Products & Services
Precision Products
Multiple Spindle Heads
Lead Screw Feed Tap Units
Drill Units
Working Holding Fixtures
Fixture Columns
Standard Upright Machines
Sales Network
"W" Companies
Wisconsin Machine Tool Corporation

Wisconsin Machine Tool Corporation

3225 Gateway Rd. suite 100

Brookfield, WI 53045

Standard Upright Model DM-212 Drilling Machine
Standard Features
Optional Equipment
Short Form Specification


S T A N D A R D  F E A T U R E S Back to top
  •  Single spindle up to 1”-8NC in steel capacity
  •  Hardened and thread ground lead screw and nut
  •  All standard pitches, inch and metric, available for lead screw pitch
  •  Multiple spindle flanged quill is provided with flange for close coupled multiple spindle head mounting
  •  Pre-machined pads to accept optional guide bars and brackets
  •  Hardened helical gear drive
  •  Spindle speeds from 220 RPM to 1210 RPM
  •  3 HP brake motor, 1700 RPM, TEFC, 230/460 volt, 3 phase, 60 cycle
  •  Stroke flexibility is fully adjustable from 0” to 4”. Dial control is located for ease in adjustment
  •  Built-in tap protection
  • This product is available in Autocad or DXF format. Consult factory for additional information.

O P T I O N A L  E Q U I P M E N T   Back to top
  • Mounted guide bars and brackets
  • Rapid approach slides
  • Removable spindle nose – 3/4", 1-1/16”, 1-3/8” or 1-7/8” ASA or quick-change adapters
  • 5 HP brake motor, 1800 RPM, TEFC, 230/460 volt, 3 phase, 60 cycle
  • Overhead foot mounted motor
  • Tap holders
  • Short cycle stroke
  • Multiple spindle tapping heads – adjustable or fixed spindle available
  • Air counter balance for tapping heads weighing 150 lbs. or more
  • Automatic lube blocks
  • Machine bases, columns and risers
  • Additional lead screw and nut
  • Special paint


W A R R A N T Y Back to top
  • Each unit is two hour cycle tested after assembly to meet our stringent requirements and is backed by the industry’s most comprehensive Two Year Parts Warranty.


LSFU-415  S H O R T  F O R M  S P E C I F I C A T I O N S    Back to top


Rated Drilling Capacity Steel (SAE 1020) 1.125" (29 mm)
Rated Drilling Capacity Cast Iron 1.375" (35 mm)
Thrust at 860 PSI 2,700 lbs (1,227 kg)
Motor Horsepower 5 HP (3.7 Kw)
Spindle Speed 330 to 3000 RPM
Feed Rate (adjustable) 2 to 120 IPM
Rapid Traverse 120 to 800 IPM
Depth Control (positive stop) Adjustable through full stroke
Spindle Concentricity 0.0005" T.I.R. (.013 mm)
Depth Repeatability +/-0.0005" (+/-.013 mm)
Copyright © 2008 Wisconsin Machine Tool Corporation. All rights reserved.